Night Train
Member
- Joined
- Mar 19, 2002
- Messages
- 329
My car has been family owned since new and only has 99,430 miles. It has always been garaged except when it was at the shop waiting for work to be performed. The car is black with grey interior. It is a t-top car, but is exceptionally tight. You have to really pull the door hard to close it due to its being so air tight. Cotton's has done all of the work on the car over the past 12 years. As you can see from the list below, there have been a lot of good mods performed on my car. It has run a best of 11.0@120 but with the old CPT65 turbo and it has a new 66 ball bearing turbo on since last season. It has never had a roll bar or cage and still has the factory air, converted to 134A several years ago. NO RUST! I even have the factory window sticker! Asking $14,900.
87 TTYPE
Body NO RUST!
87 TTYPE
Body NO RUST!
- In family since new
- Fiber glass bumpers w/aluminum supports
- Rear seat “X” braces
- Large ATR rear sway bar
- Metco LCA's
- Weld Prostar rims7” front, 8” rear
- 275x60x15 MT Drag radials (well worn)
- T-tops with factory bags in trunk – Really tight when you close door
- Original paint - not a show car, but pretty nice
- Autometer boost gauge on pillar
- Hood mounted Autometer liquid filled FP gauge
- Autometer Tach, liquid filled mechanical oil and water temp gauges above radio (no holes in dash)
- Power drivers seat
- Power windows
- RPE motor
- Turbonetics 66 ball bearing turbo new in 2011
- XFI, logging switch in ash tray
- DeQuick front mount intercooler
- 83# injectors
- 206/206 roller cam
- Steel center caps
- Port matched Champion Intake
- Ported and port matched iron heads
- Roller rockers
- HP oil pump (20#'s at hot idle)
- 70mm Accufab throtle body
- Razor's Methanol injection
- Angled IAC
- Remote Cold Air kit
- Turbo Saver remote oil filter
- Delta Gate
- ATR single shot 3” stainless exhaust and Pit Bull muffler
- Competition Engineering drag shocks
- Hot Wired Walbro fuel pump
- Spool w/Strange axles, 3.42
- Hurst line lock
- Dynotech HiPro tranny
- 3200 stall converter
- Rear air bags
- All work done at Cotton's