Night Train
Member
- Joined
- Mar 19, 2002
![HPIM1070.JPG HPIM1070.JPG](https://turbobuick-data.community.forum/attachments/134/134912-7be77db4a30926b77610490419fe8640.jpg)
![HPIM1071.JPG HPIM1071.JPG](https://turbobuick-data.community.forum/attachments/134/134913-7350013c03115fab4c1f5cb9b846b5b0.jpg)
![HPIM1072.JPG HPIM1072.JPG](https://turbobuick-data.community.forum/attachments/134/134914-8d45a11c94f1c49941bc0d80316cf9e5.jpg)
![HPIM1073.JPG HPIM1073.JPG](https://turbobuick-data.community.forum/attachments/134/134915-b4e6ca1303783acaf3667daf5d50948a.jpg)
![HPIM1074.JPG HPIM1074.JPG](https://turbobuick-data.community.forum/attachments/134/134916-64e8fc94050e78e8b03565e12326820d.jpg)
![HPIM1075.JPG HPIM1075.JPG](https://turbobuick-data.community.forum/attachments/134/134917-720edfbaa0d059d560bdfd9ab4e897ab.jpg)
![HPIM1076.JPG HPIM1076.JPG](https://turbobuick-data.community.forum/attachments/134/134918-9a74e52d212bd3a6711b1a08cb7537e6.jpg)
![HPIM1078.JPG HPIM1078.JPG](https://turbobuick-data.community.forum/attachments/134/134920-94fc0dacd5d1fd99af41f52874b42f84.jpg)
![HPIM1079.JPG HPIM1079.JPG](https://turbobuick-data.community.forum/attachments/134/134921-e1fcce55277809c08b017d3c67436254.jpg)
87 TTYPE
Body NO RUST!
- In family since new
- Fiber glass bumpers w/aluminum supports
- Rear seat “X” braces
- Large ATR rear sway bar
- Metco LCA's
- Weld Prostar rims7” front, 8” rear
- 275x60x15 MT Drag radials (well worn)
- T-tops with factory bags in trunk – Really tight when you close door
- Original paint - not a show car, but pretty nice
- Autometer boost gauge on pillar
- Hood mounted Autometer liquid filled FP gauge
- Autometer Tach, liquid filled mechanical oil and water temp gauges above radio (no holes in dash)
- Power drivers seat
- Power windows
- RPE motor
- Turbonetics 66 ball bearing turbo new in 2011
- XFI, logging switch in ash tray
- DeQuick front mount intercooler
- 83# injectors
- 206/206 roller cam
- Steel center caps
- Port matched Champion Intake
- Ported and port matched iron heads
- Roller rockers
- HP oil pump (20#'s at hot idle)
- 70mm Accufab throtle body
- Razor's Methanol injection
- Angled IAC
- Remote Cold Air kit
- Turbo Saver remote oil filter
- Delta Gate
- ATR single shot 3” stainless exhaust and Pit Bull muffler
- Competition Engineering drag shocks
- Hot Wired Walbro fuel pump
- Spool w/Strange axles, 3.42
- Hurst line lock
- Dynotech HiPro tranny
- 3200 stall converter
- Rear air bags
- All work done at Cotton's