You can type here any text you want

2.1 scanmaster readings

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

ryanv

86 regal t-type
Joined
May 3, 2011
Messages
78
Last summer I bought this car and started putting in some new parts, I bought a FMIC, hotwire kit, and have been trying to tune the car. I started it up after having it stored for a while and noticed its running a little rough.
Here are my scanmaster readings @idle
o2 200-800
af-04-05
l8-38-40
bat 12.9
int 122-132
bl 116-126
clt 165
ats 85-106
r-800
tps .48
iac 53
cc125

I adjusted my fp to 43lb but from what I read it seemed like some of these numbers were pretty far off. If so any suggestion?

I took it out after storing and got on it for a second, not even WOT and was seeing knock? I bought some race gas to see if that helps but haven't tried yet, I figured I would see you what you guys say.
 
I don't see any numbers that are off too badly, not enough to cause runnning issues that is. The AF (air flow) is a little lower than it should be, the ideal value should be 6. This could indicate a possible badly calibrated MAF.
 
That's good, do you have any suggestions on things I need in order to run race gas. I was thinking I put on only1500 miles a year that was a good idea.
 
Back
Top