2.50 2004r first gear ratio planet

[chris718]

thanks to those who showed interest in this product and those who purchased them .i will have six by the end of the week (next friday )so this is your chance to get em if you missed out last time around .also ,we did it this time by chanmging the reverse ratio instead of the front planet ,so you wont have to figght the damn snap ring anymore .call us to reserve 718 626 4315 www.ckperformance.com

 

[V6RACER]

2.50 first gear

Tell me a little about some of the people using this product. Are they using it in a T6 or for retrofits behind other engines? What are some of the results (ETs) of this product.

 

[chris718]

the benefit of this product is it alows vehicles w/ hi powered engines to gain tractionb out of the gate by not overpowering the tires .it is used w/ the 231 as well as other engine combos .by reducing gear reduction ,the car will hook up better with minimal chassis mods making a hi strung motor more user friendly w / street suspension .also you can run more mph in 1st and 2nd alowing a numerically lower rear end in certain applications where trap rpm is above the engines power curve.

 

[V6RACER]

Any examples yet??

 

[chris718]

typically a car will gain anywere from 2 tenths to 8 tenths depending on how bad the motor overpowers the tires and chassis .g routsos 10.56 /128 went 9.90 /136 with planet and phil boulis went frm 9.62 to 9.59 w /no increase in mile per hour but the 10.5s werent making bacon and the car left w/26 pounds on one f@#%in tire . those of you out there know how similar powered vehicles w/equally skilled drivers cant both win the race .alot of wins are credited to ck performances ability to outsmart our competition through the use of gear ratios .weve been outmotored and kicked defeat in the nuts through outgearing a competitor .try loosening a rusted lug nut w/a 1/4 inch ratchet faster than someone w/ a 1/2 drive and a 3 foot pipe . thanks for the interest in my products.www.ckperformance.com