200-4R manual VB operating temps

[PonchoMan]

Does anyone have normal temp readings for a 200-4R with a manual VB? Finishing my build and want to do some benchmarking. Thanks in advance!

 

[Rick the pool guy]

Mine runs between 140/200 full bullet internals and aftermarket pan
And if its really warm out say around 90 I run around 190 /230

 

[Rick the pool guy]

Mine runs between 140/200 full bullet internals and aftermarket pan
And if its really warm out say around 90 I run around 190 /230

Damn auto correct billet lol

 

[Rick the pool guy]

Also running external cooler with the radiator

 

[PonchoMan]

Also running external cooler with the radiator

Thanks my build is similar. Is your VB constant pressure? Thanks again.

 

[Rick the pool guy]

Don't know if it is but it also has a trans brake ( haven't used it yet) been foot braking since I put the hydroboost in

 

[PonchoMan]

Don't know if it is but it also has a trans brake ( haven't used it yet) been foot braking since I put the hydroboost in

Does it have a TV cable to the Throtle body or carb? If not then it’s constant (high) pressure. Most are .

 

[Turbo6inKY]

Does anyone have normal temp readings for a 200-4R with a manual VB? Finishing my build and want to do some benchmarking. Thanks in advance!

It has more to do with load and how much slip you have in the converter. All the heat is generated in the converter. The more efficient the converter, the less heat you're going to have to deal with. The rest of the guts don't really matter that much.

All that said, you want that fluid below 200F.