2004R PRESSURE READINGS AFTER REBUILD

[PaulRV6]

Ok so I am done with the rebuild and its back in the car, filled with 10 qts of DEX 6 fluid and here are the pressure readings up on jackstands.
park 86 288 full TV 1500 rpm
R 190 330 full TV 1500 rpm
N 86 285
D 87 268-275
3 87 269
2 250 265
1 235 261

So what can you tell me about these readings before I take it off the jackstands. Actually I have to fix the brake system before hand anyways. I also nmeed to compare these to after the last rebuild. Thanks

paul

 

[turbo nasty]

Great pressures. And FWIW I dont use dex IV ....yes it takes the heat but I dont like the shifts with it.

 

[PaulRV6]

Well after 90.00 worth of fluid I don't think I will be changing it, I will just have to see how it shifts.
Thanks for the input.
Paul

 

[David Husek]

Ok so I am done with the rebuild and its back in the car, filled with 10 qts of DEX 6 fluid and here are the pressure readings up on jackstands.
park 86 288 full TV 1500 rpm
R 190 330 full TV 1500 rpm
N 86 285
D 87 268-275
3 87 269
2 250 265
1 235 261

So what can you tell me about these readings before I take it off the jackstands. Actually I have to fix the brake system before hand anyways. I also nmeed to compare these to after the last rebuild. Thanks

paul

Pressures look good, at light TV in gear you should have 170ish. Make sure pressure rise is immediate when TV is given. This is more important than looking for max pressures, which should always be 250+.