200c lock up question

[burnout]

Going to be buying a 86 T-type roller for a good price. I'm getting a 200c, crossmember and converter with it. I'm going to use this trans for the summer and swap in a 200r4 in the winter. My question is how does the lock up get controlled with the 200c? Do I do it manually or can the chip be programmed to do it with a 3 speed trans? This car will have a 87 turbo engine in it.

Thanks Dave

 

[SSedan64]

The 200C Trans' connector 2-Pin Plug will be different than the 87s' 2004R 4-Pin Pigtail connector.
You could change the 200C Tran's connector Plug to fit the 87s' 4-Pin Pigtail harness.
http://www.makcotransmissionparts.com/200-4Rsolenoid.html
http://www.transmissionpartsusa.com/2004R_transmission_solenoids_s/4847.htm

 

[burnout]

Thaks SSedan64. I have a 4 pin connector but with two active pins. I'm thinking about just locking up manually on highway and leaving it unlocked around town. I will be putting in a 200r4 but not this summer. Do you know if the 86/87 TV cable will work with the 200c.

Thanks again Dave

 

[SSedan64]

TV cable should work.