200r4 lockup wireing

[Tunedup]

Are the pins in the 4 pin connector the same as 700r4 on a 200r4? I havent been able to find wireing info on a 200r4 but found plenty for 700r4s. What I want to know does pin "a" go to a switched 12v and does pin "d" go to ground? Do I need any more connections to get the converter to lock up?

 

[toddmingnworld]

Valve Body for 2004R

Hey folks...I need some help here, my trans was rebuilt and I need a GN Valve Body and Governor so my mechanic can complete the job. Does anyone know where, who or what I can do to get my hands on these parts? Any suggestions and advice given would be greatly appreciated.

Thanks,

Todd M.

 

[MeanBuicks]

Tunedup: It'd help if you let us know what model vehicle your working with. Assuming a TR, yes, A-12V, D-ground. B goes to 4th gear switch and C goes to 3rd gear switch.

Todd, you need only to contact Bruce and he should be able to fix you up.

 

[Tunedup]

Hey,

Thanks for the help the tranny is out of a 85 monte carlo not a ss but it has the h.o engine that came in the ss.

 

[MeanBuicks]

In that case, you'll only have a 4th gear pressure switch on that valve body.