3" electric cutouts, mafs, braces , and other stuff

[pacecarta]

front lower frame braces (kirban) ... 45 shipped

zo6 maf (5 pin 4") ....85 shipped

Turbotweak 6.0 wideband chip and 60# mototron injectors (from turbotweak) .. 325 shipped

precision plenum (not polished ) with rjc power plate and 62mm steve monroe bored throttle body (bare).. 275

race ported iron heads from merkel .. big valves , beehive springs , cut for orings 850 shipped

dual fans for above (valeo) with casper adapter 100
ppal ok +3.5%
shipping included will be to lower 48 only

 

[nonosv6]

I'll take the fender braces... Paypal? Joel

 

[G NASTY]

Any pics of rad and fans?

 

[EVIL]

i'll take the dmh electric cut out.

D

 

[pacecarta]

I'll take the fender braces... Paypal? Joel

pm sent to those who asked

 

[buickruss]

Did one of those cutouts work better than the other?

 

[SIXBANGR]

PM sent on downpipe

 

[trick86]

Griffin Aluminum Rad

Intereted in the Aluminum rad, is it possible to see some pics? Condition? Any Dings? Please send to trick86@live.ca
Thanks

 

[pacecarta]

Did one of those cutouts work better than the other?

the summit came off a different car , new it is cheaper than the DMH , the summit one one would chatter a little after a WOT blast so youd have to touch the switch to close it took off and went to a straight test , they say you can put silicone at the door edge to stop that noise

ill post pics of items soon

sixbanger sending PM

 

[pacecarta]

pics of rad and fans
its a true drop in
2.75 thick core with dual 1" tubes si basically its two f body rads plus has provisions for stock oil and trans cooler located at rear (use all your stock lines )

fans have the bracket that allows you to just drop it down and bolt it under the ac hose clamps at the rad top plate
and the stock radiator top plate fits the radiator just like stock

 

[nonosv6]

sorry paul, im gonna pass on the fender braces....

 

[SIXBANGR]

Paypal is sent for the THDP

 

[TURBOPOWERED68]

I'll tAke the LS1 maf ,I'll call you later today

 

[m233roller]

Paul,
Just paypaled you for the DMH cutout. Thanks Mike
PS. Pic. of it looks great !!

 

[pacecarta]

david (turbopower68) i have a maf set aside for you already , ill bring ya something to try out the track rental

 

[TURBOPOWERED68]

david (turbopower68) i have a maf set aside for you already , ill bring ya something to try out the track rental

I love you bro

 

[pacecarta]

pic of the summit cutout

 

[DoubleD]

for the precision plenum, powerplate, and TB combo: By bare do you mean with no sensors? IAC boss included? linkage arm etc? I guess a pic would show it if you could get one.

Thanks,

-D

 

[pacecarta]

bare just like you'd get it from steve at throttlebodys.com (he gets 130 + shipping just for the service with you providing the throttle body) , it has no throttle linkage brackets or sensors but it does have the stock iac mount

 

[pacecarta]

heres pics
the plenum is a 70mm
and the zo6 maf