4l60e

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

tta1240

CAMEL TOE
Joined
May 5, 2003
Messages
510
i just lost 2nd gear in my 99 t/a with a 4l60e,just wondering if anyone
knows who makes a good overhaule kit and if i need yo have my trans guy
do any tricks to make it hold up longer? thanks jim ps i do have a gn
 
Call Jeg`s

TCI PRO SUPER KIT
PN# 890-378900 30-spline $219.99

incluse gaskets,seal kit, pan gasket (re-usable type) new friction clutch, steel plate,bands,H.V. filter and a drain plug kit.

there is also a MASTER RACING OVERHAUL KIT

PN#890-379100 30-spline $159.99


I will also want to up-grand the four (4) gear plantary to the five (5) gear one. you will also have to change the forward drum with trust bearing. I believe the GM truck series comes with the five gear plantary.
 
i buy all my trans kits and parts from makco distributing out of dallas area.

www.bulkpart.com

i rebuilt the 4l60E in my 3/4ton 4x4 chevy. i had lost 2nd and 4th gear. the band basically couldnt hold the drum and smoked itself. i bought this kit if i remember correctly..# HP35004R-K
High Performance, Master Kit, 4L60E w/ Red Eagle Friction & Kolene Steels
1993 - UP Master Kit includes:
Gaskets, seals and sealing ring kit.
Red Eagle friction clutch kit
With Kolene Steels clutch kit
This kit includes a 3/4 PowerPack friction ...info->

$214.40



i also used a corvette servo, 13 vane pump, and # N74020C
Band 700 / 4L60E Power Band - Red Eagle
New band Alto Red Eagle Power Band 60% thicker band anchor for HD use 2 5/8 inch wide...info->
i also used a transgo reprogramming kit. the trans shifts crisp but not harsh under part throttle. i bought the atsg manual and did it myself. its not really hard. i dont know if i had the 5 pinion planetary or not. cant remember. hope this helps, jeremy
 
give me a ring .i can set you up with the parts and tech to get it done right.heat treated reaction shaft with bearing ,five pinion front and rear carriers,billet output shaft,8 pack direct clutch with 106" steels,valve body kit,alto wide band,bushings etc.
 
Back
Top