60: degrees btdc

[Jason dcpt]

Installing a dominator efi. Is there a way to do this without putting a degree wheel on the front of the engine?

 

[TType85]

Is it a stock balancer? You can use some tape and measure it out.

Length in inches = (degrees / 360) x (3.1416 x balancer diameter)

60deg on a stock balancer would be (60 / 360) * (3.1416 * 6.82) = 3.57 inches

Other balancers diameters are different.

 

[Jason dcpt]

Bhj

 

[TType85]

I would measure it and plug the numbers in and see what you get

 

[Jason dcpt]

Will do. Thanks again for the info

 

[Jason dcpt]

Your math was dead on and I contacted Don for confirmation. And with a bhj balancer its 3.25