67/65 turbo

[Nicksturbo]

anyone running 67/65 turbo with 32 stall?how fast does it Spool up? To fast? Do you melt the tires or what? Thanks,
Nick

 

[TheYak]

i have that combo, only got to drive it once though (oil leak on first test drive). But i ran it at 20psi and it spooled fast, but didn't break loose the drag radials. But that was with a real fat tune so i'm sure there's alot of power left to be unlocked with some tweaking. I'll try again soon and let you know...

 

[Nicksturbo]

67/65

THANK YOU FOR THE INPUT Yak

 

[cabech984]

Can someone post a link to the Turbo??

 

[Royal-T-Ltd]

FULL THROTTLE SPEED - Item Matrix Page

Can someone post a link to the Turbo??

 

[TheYak]

anyone running 67/65 turbo with 32 stall?how fast does it Spool up? To fast? Do you melt the tires or what? Thanks,
Nick

Got the car together and took for a long test drive. It spools almost off idle with the 3200 converter and keeps climbing to whatever you set the boost at. I noticed some boost creep so i might have to address that later. But all in all i think the 6765, 60# motrons, tt chip and 3200 stall is a great combo

 

[aquickv6]

Yak

.63 housing or .82 ? Thanks

 

[TheYak]

.63

 

[cabech984]

Ball bearing or not?

 

[TheYak]

Ball bearing or not?

Balls :biggrin:

 

[cabech984]

Balls :biggrin:

Whats the engine combo, stock heads etc? Im geting excited about this turbo to replace my worn out TE44!!!

 

[TheYak]

Whats the engine combo, stock heads etc? Im geting excited about this turbo to replace my worn out TE44!!!

Motor is bored .020, diamond pistons, 210/210 roller, rjc girdle, stock heads w/ 1.65 rockers, razor's alky and precision front mount...

 

[Nicksturbo]

67/65

Thanka again Yak.
Nick

 

[MikeL.]

Spool up on this thing is sick fast. Actually I'm getting boost spike/creep issues. the wastegate hole is surprisingly small and I'm going to have to port mine.

 

[TheYak]

Spool up on this thing is sick fast. Actually I'm getting boost spike/creep issues. the wastegate hole is surprisingly small and I'm going to have to port mine.

Same thing here, i'm probably going to end up porting mine. My wastegate is nearly set at minimum and i'm at 22psi. It's the HD wastegate from Cotton's but still that's alot...