I purchased these last Month from Daves87GN and realized They are a little much for my current setup. I will put them back in the box and ship USPS in the US , $160.00 for the injectors and the chip. Chip is a TT Alcohol chip, 23/21 degree, and 20-23 PSI. paypal LA350@yahoo.com
72 LB Injectors and TT Alcohol Chip
- Thread starter klmnla
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- Sep 24, 2010
- Messages
- 6,630
What brand of injectors, please?
Are they Low Impedance?
Are they Low Impedance?
They are Siemens #3145. I was told that these Siemens Deka injectors were the low Z injectors.
- Joined
- Sep 24, 2010
- Messages
- 6,630
I'll need different drivers put in my ECM to run these injectors, and that isn't so much bad thing, it might even be a good thing, but I'm not ready to give up on my 60 pounders and stock ECM just yet.
Those have been 10.58 already. I wasn't pushing it and will they probably do 10.3's without an issue. That's where I will likely run into a fuel pump issue. I'm running a Red's single pump.
Mind you, this is a pure street car.
The track officials got a little bent the last time I was out there. Went 10.97 on the first pass. They only let me make two passes.:biggrin:
I'm thinking about it though.
I need to look at Daves87GN combo and see if it's anything like mine. The chip is meaningless to me as I have both Street and Strip chips already custom made for my combo. I haven't even tried the Strip chip yet!
Sell all of it if you have the chance, but I'm pondering it.........
Thanks for getting back to me.
Those have been 10.58 already. I wasn't pushing it and will they probably do 10.3's without an issue. That's where I will likely run into a fuel pump issue. I'm running a Red's single pump.
Mind you, this is a pure street car.
The track officials got a little bent the last time I was out there. Went 10.97 on the first pass. They only let me make two passes.:biggrin:
I'm thinking about it though.
I need to look at Daves87GN combo and see if it's anything like mine. The chip is meaningless to me as I have both Street and Strip chips already custom made for my combo. I haven't even tried the Strip chip yet!
Sell all of it if you have the chance, but I'm pondering it.........
Thanks for getting back to me.
- Joined
- Sep 24, 2010
- Messages
- 6,630
Yes, I am aware of that fact.
I got away with 2 10.7 passes tonight.
1 at 126 and 1 at 127. I had the exhaust corked and it was running on my street MT drag radials.
I also showed everyone how to try a burnout in reverse! :redface: Yup, that was pretty embarassing, yes it was......
The track officials were really cool tonight and there were some very, very fast cars there.
I think I'm just gonna stick with what's working for the time being.
NEW PRICE******* $150 SHIPPED. Paypal LA350@yahoo.com
Similar threads
