84gn will not run

[gary brooke]

10 months on the carport & still not running.changed to 86/87 ecm,ig&coilpack and everything fine.put 009s in and it idled ok,but when i reach anything over 0 on boost it would lose power.a month of that and it was back to stock inj. now it will not run.4 cam sensors,4crank sensors,6ignition mod.and 8ecms.cranks,fires and gets fuel & tries to run but wont.what to try next. thanks, g.brooke ps.what is a noid light,and please put the correct coil 84/85 in sticky,thats an 86/87 coil,3 screws on bottom not 4.

 

[REDS HOT AIR]

did you rewire or get a harness adapter for the ign swap?

 

[crazygn]

did you get a new chip when you changed from the 86-87 ecm, and bigger injectors then back to the stock one's. Or like red said about reworing the module when you changed.

 

[gary brooke]

84 gn will not run

yes i rewired terminals and changed to 42.5 chip.then when i went back to stock injectors i put terminals from newer fwd cars,and yes ismoked a few ecm's.but now i have rung out all ecm wires.i think i will get 1 more ecm from yards,my have burned some of the drivers up. thanks g.brooke