86/87 bottom end

[intercooled 85]

looking for a drop and go 86/87 bottom end. with all internals could be stock. im fine with that. my bottom end took a crap on me and the main bearings went. local to the pa area is preferred. thank you.

 

[boostjunkie]

looking for a drop and go 86/87 bottom end. with all internals could be stock. im fine with that. my bottom end took a crap on me and the main bearings went. local to the pa area is preferred. thank you.

if this helps you i have this stuff i bought from Sam and never used it i am in PA .Thanks Shawn http://www.turbobuick.com/forums/threads/performance-parts-for-sale.403265/

 

[intercooled 85]

I could not see the post

Posted from the TurboBuick.Com mobile app

 

[intercooled 85]

I see it now. Id have to get a shop to install that.

Posted from the TurboBuick.Com mobile app

 

[psycho6cyl]

no matter what installing a new bottom end will require a machine shop. block has to be line bored to new crank. i have a std std crank for 250 shipped. its from original 87 gn.

 

[dsmith4994]

I have a 1985 hot air long block for sale with 78K miles for $500 in CT 06492
Its not a 109 block but has the turbo crank and pistons from the factory just like the 86-87
you will need to drill out the turbo oil return line

 

[intercooled 85]

How much. And is it running

Posted from the TurboBuick.Com mobile app

 

[bison]

I've got a 60k longblock here in CT that's never been opened. You can have it for $1600. I can update the timing chain and rear seal for extra. I'll pull the pan/caps in front of you so you see exactly what you're getting. No junk

 

[Vsix]

I got a fresh 87 longblock here in PA

 

[Brandon706]

I got a stock rotating assembly that came out of running, no knocking car. I will sale for 400 dollars or best offer pistons, rods, crank, damper, flexplate. I am located in south jersey