this was formely bescurred's car
176k on chassis
here is a list
86 gn
hardtop
new shortblock in crate
eagle h-beam rods
eagle forged crank
arp rod bolts
arp main studs
t/a billet main caps
cometic .040 head gaskets
je pistons .030 over
je rings
clevite bearings
internally balanced
new harmonic balancer sfi approved
new flywheel sfi approved
champion cast iron ported heads
42lb injectors
accufab fuel pressure regulator
te60 turbo
3 inch downpipe
precision intercooler
polished rjc pulleys
brian hofer built transmission
3200 stall
new carpet
new seat upholstery
ta 270 cam-270 duration .455 lift
t/a performance lifters
new ta blueprinted oil pump assembly.
slp zr1 rims
drag radials
hoosier slicks
i am sure there is something i am forgetting, so dont hesitate to ask.
outside is a 10.5 out of 10 i have pics of the paint process
inside is a 8.5 out of 10
i will sell the complete motor only, but i will not sell the car seperate unless the engine has been sold. i will not seperate nothing. so dont ask. the car currently has a slight knock at idle; hence the new engine
i do have a buyer for the car. so if you want the engine and not the car pm me. i am asking 15500.00 for the car. not to be smart a--, but if your not interested dont post. i dont care if you 3rd uncles, second cousin, mother in law bought one for 12k. i have all the time in the world for people thats interested.
thanks
greg
car is in georgia
photos are courtesy of bescurred
176k on chassis
here is a list
86 gn
hardtop
new shortblock in crate
eagle h-beam rods
eagle forged crank
arp rod bolts
arp main studs
t/a billet main caps
cometic .040 head gaskets
je pistons .030 over
je rings
clevite bearings
internally balanced
new harmonic balancer sfi approved
new flywheel sfi approved
champion cast iron ported heads
42lb injectors
accufab fuel pressure regulator
te60 turbo
3 inch downpipe
precision intercooler
polished rjc pulleys
brian hofer built transmission
3200 stall
new carpet
new seat upholstery
ta 270 cam-270 duration .455 lift
t/a performance lifters
new ta blueprinted oil pump assembly.
slp zr1 rims
drag radials
hoosier slicks
i am sure there is something i am forgetting, so dont hesitate to ask.
outside is a 10.5 out of 10 i have pics of the paint process
inside is a 8.5 out of 10
i will sell the complete motor only, but i will not sell the car seperate unless the engine has been sold. i will not seperate nothing. so dont ask. the car currently has a slight knock at idle; hence the new engine
i do have a buyer for the car. so if you want the engine and not the car pm me. i am asking 15500.00 for the car. not to be smart a--, but if your not interested dont post. i dont care if you 3rd uncles, second cousin, mother in law bought one for 12k. i have all the time in the world for people thats interested.
thanks
greg
car is in georgia
photos are courtesy of bescurred