87 coil conversion problems

[GN84Turbo]

I can't get it to work! What is the correct wiring from the coilpack to the module? i have the caspers apapter plate and wire adapter, but no where does it tell me **** about how the wires line up. i tried to compare with my old one, but nothing. WTF? help me out here, has anyone done this conversion??

 

[WFO]

this should help

http://www.gnttype.org/techarea/ignition/module.html


didn't someone else have a problem with a casper's harness being wired wrong?

 

[GN84Turbo]

so the wiring for the casper harness is wrong? Anyone else have this problem? And i still need to know how the 87 module is wired to the 87 coil pack. No instructions there!! what do i do?

 

[Stealthfxxr]

coil conversion

Terry i'm having a problem with my conversion also, going to the type II. First the dealer gave me the wrong ignition module and i was blowing the ecm/ign fuse. Got the correct module and it starts and runs but its breaking up bad at about 3000rpm. gonnna do some more troubleshooting this weekend. I didnt use the caspers adapter i cut and solldered a new plug in guess i gotta check and makea sure i didnt screw it up. I let you know what happens.
Dale

 

[GN84Turbo]

Yeah well sure enough, the casper harness is put together wrong. the connector that plugs into the module is up-side down, but otherwise the wires are in the right places. Gonna have to pull it apart and flip the connector around. what a PITA. OH well. thanks guys,

 

[Nocooler]

hmm...my adapter works. Give Caspers a call before you cut it up.