Originally posted by Turbojorge
Sounds like a very strong set up. You say you only have "some" mods. Damn.
I'm trying to get a chip for my car because the one thats on it now is really a race chip.( I can't afford 110 for the street). It was on there when I bought the car in Jan. A buddy of mine hooked up that OTC scan tool and was able to tell me that the chip has 25 degrees of timming on it. It's a Pitbull chip. Do you know where I can get a custom chip?
Feb 13. That sucks. I'm thinking about going up to Bradenton because I really want to see what the car is doing.
later.
Ya, usually don't like to tell all about the car(hence the sig=some mods), but i figure a lot of people know anyway so F-IT.
As for that chip, thats entirely to much timming for pump fuel and any type of boost over maybe 15 at the most, probably less. I would suggest, if u don't have one, get a scan master. So u know what the car is doing with each chip u run. Like my car ran way rich on the race chip i used when i ran my car, but runs a lot better on my street chip. If u are running 009's for injectors i would say get reds93 chip for the street.
Or another alternative is get an smc alky kit, and u could run that race chip that is in the car right now on pump fuel.

I havent tryed it yet, but i know of guys cruising around on high timming race chips with alky and running 19-21 psi all the time.

I run 18-22 psi with my street chip which has 22 degrees of timming in first and second, and 20 in third.
There is so many ways to go, man its ridiculous. I really don't know of any1 that burns custom chips, but if u post that question in the louge im sure someone on here does.
If you need, work done on your car, i know tons of guys(laz, freddy, jeff=economy auto=built my car).
Shoebox