You can type here any text you want

Adjustable Wastegate Actuator installation question

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

BuickMike231

60% of the time, it works every time.
Joined
Feb 21, 2007
Messages
704
Hey guys, I'm installing an adjustable wastegate actuator and have gotten it all apart except for the skinny end. Does this clip onto the bottom of the turbo with a C clip type thing? I didn't want to start yanking on it and break it, so before I go any farther I just wanted to make sure. I included a picture of the spot I'm talking about. (I know my turbo looks terrible..) Any help would be greatly appreciated!! Thanks guys!
 

Attachments

  • TexasStuff 020.jpg
    TexasStuff 020.jpg
    104.1 KB · Views: 158
just slide that little eclip off

if it breaks no big deal , hardware stores carry them or a hairpin clip will do

i use the same clip as on the throttle bracket and cruise cable ends
 
Back
Top