alchy install: wiring (which spade connector to which terminal on bottle?)

[GN SBS]

Hi folks,
A quick alchy install question (can't get in touch with SMC)--

When connecting the wiring harness to the bottle, there are two spade connections to what looks like a switch, but the instructions do not indicate which wire to connect to which spade-- what is correct?

Note that I'm not talking about the 2 male/female connectors-- I'm not quite slow enough to miss these...

thanks,
Scott

 

[1970gsx]

Not sure if I'm following your question correctly, but the terminal with the 2 black and 1 green wire goes to the pressure switch, and the 1 black and 1 white terminal goes to the low alky sender.

 

[GN SBS]

I'm talking about the wires to the pressure switch (2black, 1 green)-- there are two spades on the switch and I'm wondering which gets the black and which gets the green wire.

thanks,
Scott

 

[GN SBS]

ttt

 

[Renthorin]

It doesn't matter. Either one to either one will work. It is just making a circuit.

I had the same dilemma so I calld Steve at SMC. He said either one to either one.

 

[GN SBS]

Thanks, that's what I thought and how I hooked it up last night, but nice to know I won't have to change anything.