Alky Inj. Light

[Tom Walker]

I'd like to wire up the light in the dash to come on when my my alcohol starts to spray. Can anyone tell me how to tie into the wiring on my SMC progressive unit?

 

[G. Price]

I'm intersested in this also. Maybe tap into the power wire to the pump? Light goes on when the pump activates?

 

[Tom Walker]

Wonder if Steve Schlupsa (sp?)has ever done this? Would be a neat thing to see when Boosting!!!

 

[Tom Walker]

Anyone know which wire to tap to get the proper signal on the SMC progressive kit? Noticed my Ilky Inj. light (on dash) doesn't have a socket or bulb. I know factory decided against this type of chemical IC. How tough will it be to fit a socket/bulb? Anyone?

 

[unix_punk]

all you need is a 12v bulb and a grommet to hold it. on Razors kit the bulb hooks to the pump leads so it lights up gradually with the pump as the voltage increases.

 

[G. Price]

I just checked the black and red wires from the control head will activate a 12volt bulb when the pump activates.

 

[G. Price]

I have a GNX dash. I just replaced the alarm bulb(not used) that is in the center of the dash with a 12v led. Red wire to red and black wire to black wire. The thing works great.