This is a BMS Stage II on center all aluminum (never used) block.
Extremely rare.
Originally cast by M&A for Brayton Engineering.
Before you ask, I'm selling it because I have two, and obviosly can't afford to build both.
Pictures can be viewed here:
http://community.webshots.com/user/turbodave
Look for the Aluminum SII block for sale album.
Key features:
On Center
Dry sump (but I will be using a Duttwieler oil system on my other block which is what I would recommend for this one).
Steel mains at positions 1,2 & 3
#2 and #3 mains are 4 bolt with splayed outers.
Studs/bolts are brand new ARP
Bores are Nik-A-Sil and finish bored/honed to 4.020
Has stock starter pad
Tall Deck @ ~9.5xx"
Unique center oiling gallery and valley strengthening webs.
lifter bores drilled for stock type oil provisions from center gallery.
Lifter bores are stock .842"
typical of SII blocks it uses a BBC rear main seal.
The SII front cover is not included, but I can be talked out of it for the right deal.
Any other questions feel free to ask.
Asking $1500 + shipping (prefer local) or might consider a trade for a high quality billet stroker crank (3.590 or 3.625)
Extremely rare.
Originally cast by M&A for Brayton Engineering.
Before you ask, I'm selling it because I have two, and obviosly can't afford to build both.
Pictures can be viewed here:
http://community.webshots.com/user/turbodave
Look for the Aluminum SII block for sale album.
Key features:
On Center
Dry sump (but I will be using a Duttwieler oil system on my other block which is what I would recommend for this one).
Steel mains at positions 1,2 & 3
#2 and #3 mains are 4 bolt with splayed outers.
Studs/bolts are brand new ARP
Bores are Nik-A-Sil and finish bored/honed to 4.020
Has stock starter pad
Tall Deck @ ~9.5xx"
Unique center oiling gallery and valley strengthening webs.
lifter bores drilled for stock type oil provisions from center gallery.
Lifter bores are stock .842"
typical of SII blocks it uses a BBC rear main seal.
The SII front cover is not included, but I can be talked out of it for the right deal.
Any other questions feel free to ask.
Asking $1500 + shipping (prefer local) or might consider a trade for a high quality billet stroker crank (3.590 or 3.625)