another arp question

[shocker998md]

alright guys, I found the head studs that I want to use on jegs. They are 80 bucks, so that leaves me with 20 dollars left on my gift card. They list two part numbers and dont give any information about them. So I went to summit and this is what it shows.

ARP 123-6021 - ARP Pro Series Connecting Rod Bolts - Overview - SummitRacing.com

Rod Bolts, Pro Series ARP 2000 2-Piece, Buick 90 Degree 1.500" UHL


and ARP 123-6022 - ARP Pro Series Connecting Rod Bolts - Overview - SummitRacing.com

Rod Bolts, Pro Series ARP 2000 2-Piece, Buick 90 Degree 1.700" UHL

which should I use. Im using stock rods.

 

[LOT]

I believe

You need the 6022---But why spend $ on rod bolts as the stock ones are more than good enough--IMO

 

[shocker998md]

well i have 20 dollars left on a gift card for jegs so I figured id use it on that.

 

[S10xGN]

Don't forget the cost of resizing the big-end of the rods, a must do after changing rod bolts...

 

[turbobob924]

Im pretty sure the cost of the ARP rod bolts is like $16 for each rod (set of 2)

Just an FYI

 

[machinegun]

If you are going a fairly stock rebuild I recommend using the SPS hardware that is in your stock rods. Have the rods checked and resized and you will be fine.

Spend your money elsewhere.