Another cam question

[bogies87]

So in the near future I am going to install a ductile roller cam. I WAS certain that if I went ductile that I could just install this with no machine work, use stock rocker arms and stock push rods. Now after a recent thread was brought back I read it and question if it is that easy or not. So here goes If I purchase a roller cam kit from a vendor will everything I need be included, will it require any machine work?????
I'm confused

 

[jasjamz]

Check into the kit that Full Throttle sells. I ordered one for a friend and it came with everything except the timing chain and rocker arms. I have a car here that has stock rockers, ductle roller cam, and the valvetrain is nice and quiet.

 

[bogies87]

Thats one of the reasons I am going roller I like quiet. Thanks for the input I will check with full throttle. I am not sure about their site, I have been trying to get on but it says there is an error. I will check later.