Another Turbo ID

[PARKBOY]

Will take pics tomorrow if I need to but there are marking on the compressor side. A/R 60 and below that M10 Im not sure if thats any help. Thanks alot.

Also does anyone have a stock turbo that they could look at and tell me what it has stamped on it? thanks

 

[threerail]

sounds like a ta49, post pics from diferent sides, what size ex housing? .63 or .82 garrett? or precision

 

[PARKBOY]

Ive took the cover off and on the exhaust housing where it connects to the header its stamped A/R 63 M3 02 hope this helps. Id like to try and find out what I have before I go and buy a te44 when I already have a bigger than stock turbo. Here is a few pics.
Also on the fins in the last photo you can see that there is a blk stamp and white paint on two seperate fins. Couldnt get a clear photo of it and I can tell what the blk stamp says.

 

[TRYMYSIX]

Looks like a stock one to me, but to be certain, pop the exhaust housing off and measure the compressor wheel....I believe a stock one is 50mm...I think...... And a TA-49 and TE 44 are 58mm

 

[PARKBOY]

Do those stamped number I posted not me anything? Come on guys I need some help here.

 

[TurboDave]

Looks like a stock one to me, but to be certain, pop the exhaust housing off and measure the compressor wheel....I believe a stock one is 50mm...I think...... And a TA-49 and TE 44 are 58mm

Compresspr wheel isn't in the exhaust housing, it's in the compressor housing.

 

[TurboDave]

Do those stamped number I posted not me anything? Come on guys I need some help here.

Not really. Remove the inlet bell from the compressor housing and measure that opening. How many mm's ????

 

[PARKBOY]

Not really. Remove the inlet bell from the compressor housing and measure that opening. How many mm's ????

Sorry I dont have anything that measures MM but will this work (see pics) or do I need to get a tool to measure it?

 

[TurboDave]

pretty crude, but looks very close to 58mm, which would make it a TA49

 

[PARKBOY]

pretty crude, but looks very close to 58mm, which would make it a TA49

LOL yes it is but thats all I have to work with right now. Its right at 2.25in and convert that to mm I get 57.2

 

[PARKBOY]

Went and picked up a caliper today and remeasured the opening. It measures 58mm.