Yes, I used the gnttype.org guide, and only have these suggestions/additions: DO use masking tape on the edge of your fender next to the door, this will eliminate scratched paint. Instead of the 10mm open end wrench, I used a 1/4" ratchet with a 10mm socket for most of the door bolts. When the instructions say remove the 3 bolts on the inside of the fender, they do not mean inside the hood along the fender line. And they especially DO NOT MEAN the two 13mm bolts that hold the hood support!! Doh! What they mean are the bottom 3 bolts inside the wheel well. The antenna drops out the bottom when you separate the fender. Definitely not a long or difficult process to remove, but I have not reinstalled mine yet, so no comments there.