I am selling Cal Harltine's car that i bought a short time ago as i do not wish at this time to put more money into a race car right now.
I will keep it if i dont get what I want and build it next year.
The car comes damn near complete - motor,headers,turbo,downpipe,and intercooler pipes.
Car is overall a 9 condition in my terms and there is no rust.
This car hooks and runs straight and has run 8.50 at near 160mph.
This is what the car has and im sure im forgetting something.
87 GN Interior mods
10 Point Painted Moly cage
Autometer GNX style dash
Kirkey racing seats with GN colored covers
Cheetah reverse 400 shifter
On board NHRA Fire Suppresion system
Window net
Exterior
Frame is notched and reinforced(No kinked 1/4s
Wheel wells were stretched and added to
Has BBS Drag Wheels 15X11 Rears(2 sets of rear wheels included )
And Skinny fronts(new M/T front drag tires)
Complete Wolfe Rear suspension
Twin 4 piston caliper aerospace rear brakes
8.5 built rear 3.42 gears
Single 4 piston Aerospace front brakes
Brand new TRZ front suspension
all 4 A Arms and Manual Rack
3.5" exhaust out the back
Frame has been boxed in
Metco fuel cell with sender(works)
Fuel system NEW Weldon 2025 (no fuel reg)
Weldon fuel pump controller
CAS V3 Intercooler with 4" inlet and outlets
(This is the biggest baddest intercooler ever built)
Aluminum Rad support
Built Turbo 400 with Hipster Brake and JW Bell(reverse manual)
Neil Chance Aluminum Bolt together convertor(This was $3500)
HD driveshaft and loop
Fiberglass hood with pins and stock latching
ELECTRONICS
Brand new XFI with Traction control and internal logger
Drivesahft sensor (40 tooth design)
AMS 1000 boost controller
XFI stand alone harness
XFI EGT logging system with 8 probes
Manual Master with line loc
Trunk has full carpet kit
Factory doors have been gutted of their weight(still retain all power)
Price for the roller is 20K
If you wat to go TSO racing this car is ready to with your motor.
I can take additional pics of anything if you ask.
I will keep it if i dont get what I want and build it next year.
The car comes damn near complete - motor,headers,turbo,downpipe,and intercooler pipes.
Car is overall a 9 condition in my terms and there is no rust.
This car hooks and runs straight and has run 8.50 at near 160mph.
This is what the car has and im sure im forgetting something.
87 GN Interior mods
10 Point Painted Moly cage
Autometer GNX style dash
Kirkey racing seats with GN colored covers
Cheetah reverse 400 shifter
On board NHRA Fire Suppresion system
Window net
Exterior
Frame is notched and reinforced(No kinked 1/4s
Wheel wells were stretched and added to
Has BBS Drag Wheels 15X11 Rears(2 sets of rear wheels included )
And Skinny fronts(new M/T front drag tires)
Complete Wolfe Rear suspension
Twin 4 piston caliper aerospace rear brakes
8.5 built rear 3.42 gears
Single 4 piston Aerospace front brakes
Brand new TRZ front suspension
all 4 A Arms and Manual Rack
3.5" exhaust out the back
Frame has been boxed in
Metco fuel cell with sender(works)
Fuel system NEW Weldon 2025 (no fuel reg)
Weldon fuel pump controller
CAS V3 Intercooler with 4" inlet and outlets
(This is the biggest baddest intercooler ever built)
Aluminum Rad support
Built Turbo 400 with Hipster Brake and JW Bell(reverse manual)
Neil Chance Aluminum Bolt together convertor(This was $3500)
HD driveshaft and loop
Fiberglass hood with pins and stock latching
ELECTRONICS
Brand new XFI with Traction control and internal logger
Drivesahft sensor (40 tooth design)
AMS 1000 boost controller
XFI stand alone harness
XFI EGT logging system with 8 probes
Manual Master with line loc
Trunk has full carpet kit
Factory doors have been gutted of their weight(still retain all power)
Price for the roller is 20K
If you wat to go TSO racing this car is ready to with your motor.
I can take additional pics of anything if you ask.
Good price and good luck on the sale!
