Best way to run new braided fuel lines

[The_Six]

Im still on the fence with just running a new DIY 3/8 stainless line with out the stock fittings it will give me a little more volume and will be more then enough for my car. I know I wont be trying to go any faster then 11.5 no cage can go in my car need the back seat for the kids .

 

[asloan5]

look at aeroquip.cc for the best prices on ss hose with teflon liner. Summit will match prices from them. The largest I could find was a #8. So I ran 8 up and 6 back. I put the hoses in the left frame rail just ahead of the rear tire and used adel clamps around the left front coil spring area and exited the frame by the steering box. the inlet hose is routed up behind the steering pump just under the distributor cap to the fuel inlet. I used an adapter by turbofabricator on here and mounted my regulator just under my air intake pipe just about where a stock maf would go.

 

[tt460]

Thats the down side dont know how long the teflon hose will last.

From what I've read, the teflon hoses will probably outlast your vehicle.