Blazer Brake Conversion Problem

[nickygn23]

Been gathering all parts needed for the Blazer brake conversion. I have all things needed except the hub mounting bolts . I checked all over the internet,parts stores,ect. I know thousands of us have done this conversion. Anybody have a part number on these bolts?
I'm hitting dead ends everwhere.

 

[nickygn23]

Forget it .... I got it.

 

[mattyackle]

Forget it .... I got it.

I couldn't find jack on those bolts. What did you end up doing?


Sent from my iPhone using Tapatalk

 

[nickygn23]

I went through a chevy dealer. They had to order them from six different dealerships parts depts to get them. Not many left around..... Not cheap either.

 

[nickygn23]

I wish someone who has done this upgrade got back to me sooner and let me know how hard it is to get these bolts.

 

[mommasGN]

I ended up using bolts from a ford explorer. correct thread pitch and length .

 

[nickygn23]

Thanks, thats good info for others. I'll pass that on.

 

[krazy86t]

M12-1.75 45 mm length is good, 50mm length is also ok. Class 10.9 Hex flange bolts is what I used, Qty = 10 was $13 delivered in 3 days (Phos & Oil finish).

www.flangebolts.com

I Sized the thread by taking hub-spindle to local HW store that has a lot of metric fasteners, but they didn't have 6. Fastenal could order them, but $5-6/bolt after shipping