Boost control question

[turbosam6]

I'm currently running my wastegate in "tuner" mode, with the actuator just looped to the compressor. It spools well, but it hits the set boost level, then creeps up an additional 2-3 psi as rpm's go up. What can I do to stabilize it? Thanks

 

[turbosam6]

ttt

 

[Sinful6]

This is what I recommend:


http://www.turbobuick.com/forums/showthread.php?s=&threadid=77937

It's easier, and you'll get a much better spool compared to adjesting the WG arm. There is alot of good info there if you read into it. Feel free to email me.



-DC