Both Front inner and outer Bearings

[GNONYX]

Okay, I need to know is it possible to remove the inner and outer front bearings and re-pack them, or is it better to just replace them with new bearings and pack them with ball bearing grease?

 

[Squid4life]

If they are the better bearings (metal cases not plastic) you can remove, clean, and repack. Make sure they are not blued or damaged. You will need new inner seals obviously.

 

[earlbrown]

100% possible. If you have some new Timkens, FAGs, SKFs on the shelf (cones AND cups) go ahead and replace them....


but I'd run a used undamaged bearing LOOOOOOONG before I stick some parts house chinese bearings in there.