Buick Performance Shops in TX

[gn1sandrail]

Can I get any GN performance shops info anywhere in TX really. I am closest to Austin but can take the car further. I have a GN1 in a sand car I can't get to run. Motor always cranks, I always have spark, compression, and my injectors always show they are pulsing. I've done the no start tree a million times and replaced so many parts it's not even funny. Even had it running about a month ago and went to bed and got up the next day and it wouldn't run again. I just need a GN guy to sort it out for me at this point. Any help would be greatly appreciated

 

[Dhos1]

Gas? I know but you would be surprised.

 

[gn1sandrail]

Gas? I know but you would be surprised.

I don't think so. I've drained the gas a few times while letting it sit in storage and put new gas in when I start working on it again and same problem.

 

[dynoman]

What is the fuel pressure at the rail ??

 

[gn1sandrail]

42

 

[gn1sandrail]

Can I get any GN performance shops info anywhere in TX really. I am closest to Austin but can take the car further. I have a GN1 in a sand car I can't get to run. Motor always cranks, I always have spark, compression, and my injectors always show they are pulsing. I've done the no start tree a million times and replaced so many parts it's not even funny. Even had it running about a month ago and went to bed and got up the next day and it wouldn't run again. I just need a GN guy to sort it out for me at this point. Any help would be greatly appreciated

Maybe I should add I just installed an MS3 Pro PNP. Just for reference if anyone is trying to troubleshoot for me.

 

[fastdavedk]

Dale Crockett in Houston is an excellent but very slow mechanic. He has worked on all of my cars and currently is installing a billet motor in my white T Type. 713 647 6981.

 

[GBGN1]

Maybe I should add I just installed an MS3 Pro PNP. Just for reference if anyone is trying to troubleshoot for me.

Cam sync correct? I work on a lot of GN's here in North Houston and from surrounding areas/states. I have installed a lot of Holley's EFI here in north Houston.Not having the cam sync correct has stumped more than a few. Mark and Try moving the Cam sensor . Cant hurt..
Brian

 

[Eticket]

have you tried to turn the cam sensor 180 degrees? I have often made that mistake.

 

[Chuck Leeper]

I don't think so. I've drained the gas a few times while letting it sit in storage and put new gas in when I start working on it again and same problem.

Because you see the injs "pulsing" doesn't mean they are working.
Draining the system and letting it sit can/will create some nasty crud from the fuel evaporating.
Will it start with a splash of fuel into the t/b?

 

[xpander343]

Pump it up! - best crypto pumps on telegram
Make 1000% and more within 1 day, join channel @pump_upp !