Cam Shopping

[87bigcut]

I am getting a motor rebuilt and was wondering what cam I should go with for a TE-44, 3 inch DP and dual exhaust, wiseco pistons, and stock or maybe mildly ported heads.

This will be a street car.

Thanks,
Joe

 

[REDS HOT AIR]

cant go wrong with the 204/214 cam

I have them they just arent on my site yet

they idle smooth when warm if tuned right and I've gotten up to 27 mpg in my ttype when I had that combo

 

[87bigcut]

How much do you think I will get with the three speed I will be running for a while?

Joe

 

[REDS HOT AIR]

Originally posted by 87bigcut
How much do you think I will get with the three speed I will be running for a while?

Joe

heck if I know

 

[Tom Walker]

204-214?

Hey Red,
What is the lift w/stock rockers on your cam? How about the price w/lifters? Would this be good with my stock short block and Champion Irons?

 

[REDS HOT AIR]

194/204 = .411 / .434 lift with stock rockers
204/214 = .434 / .457 lift
214/224 = .457 / .480 lift
224/224 = .480 / .480 lift
234/244 = .504 / .527 lift

heres a few I have to offer in flat tappet hydrolic

I have cam and lifter combo's and have matching springs to go with them

I dont think they like prices listed on here so email me

Red@evtbs.com for prices

beware most all cams for buick motors for some reason are usually rated with 1.6 rockers for some reason
all the above lifts are with stock rockers

 

[NJTurbo]

Red

Are you going to be a Advertiser on TB.COM soon

I just do not want to take sales away from the supporting vendors

 

[norbs]

I would not use a flat tappet if you gave it to me free. I have wiped several of them destroying the motor. I am sure red can set yo up with a 210/210 billet roller

 

[REDS HOT AIR]

Originally posted by NJTurbo
Red

Are you going to be a Advertiser on TB.COM soon

I just do not want to take sales away from the supporting vendors

what supporting vendor offers them cams

look at my site and you'll see I dont even have any parts on there yet so how could I possibly even make enough to cover the outragous price to pay for a banner

gotta crawl before walking