car will not start

[kidreynolds]

I have put everything back in the car and all it will do is turn over. I set the cam sensor but not sure if it is correct could this cause the car not to start

Thanks
Brent

 

[pitoturbo]

just had the same problem double check your cam sensor my T was even backfireing bad was 180 off remember set your crank to D T C THEN 25 DEG your window sould face driver side i hope you have the casper tool , good luck keep us posted!!

 

[kidreynolds]

thanks and is it possible to set with out the casper tool

Brent

 

[19gn87]

Brent,

This should help...

Cam sensor adjustment

 

[kidreynolds]

Help

Ok I have the car at a shop here in town and they are working on it when they have time.

( The car will turn over and it will spit back throught the throttle body and not attempt to start. Does anyone know what might be wrong)

Thanks
Brent

 

[19gn87]

Here are some basics from Steve's Vortex site

No start - no spark, has injector pulse - Check the ignition module
No start - has spark, no injector pulse - Cam Sensor or ECM
No start - no spark or injector pulse - Crank sensor or module

HTH

 

[kidreynolds]

hey thanks alot for the info 19gn87 and does anyone know why the cam sensor would go bad and how much is a new one

Thanks
Brent

 

[19gn87]

Brent,

Should be able to order from HERE

Part#'s should be:

Sensor w/drive 25516915
Sensor cap 25518357
Shaft o-ring 1959331

You may also want to check with Caspers
847-247-0484

May be other sources, but I've not had the problem (yet) sorry I can't be of more help.