Car Wont Start!!!!

[TwoLaneBlackTop]

I am getting really mad now at the car.

I finaly get it alltogeahter and try to crank and it just wont start. I am running GEN 6 DFI and 83's

Here is all I know as of now

The ignigtion is working

The DFi program I have worked fine for the last user and his car was similar to mine except he had a larger cam.

Vac leaks should not be a problem as I redid the vac lines.

The car will crank and act as if it wants to start and sputter and shake in the eninge bay rather violently then it juts will not start.

I am think maybe I set the cam sensor wrong, any other ideas?

 

[Kevin Turch]

crank or cam sensor i would try.

 

[TwoLaneBlackTop]

I think the crank sensor is fine as it is sparking

I have 2 cam sensors and I can not get it to start with either, even tried to spray some starting fluid in the car and nothing.

I also pulled a plug and could tell gas was getting to the motor.

 

[Rickerbucks]

Although I run a risk of embarrassing myself to a truly extraordinary level.

I spent about 20 hours chasing a similar problem to find that I had not plugged my jumper harness into the ECM box properly. As a result two injectors were not firing and though the car did run, it ran like crap of course. Took me AGES to figure it out.