Changed liters and pushrods an now my car is missing...Help

[TurBo BiRd]

I changed my lifters and pushrods and now my car is missing(not a lope in my idle where its missing, It misses in a conssitent pattern). I lubed the bottom of the lifters and did a break in. I want to know what could be causing this. Could I have not hooked a sensor and it could cause this?

Thanks, Bobby.

 

[TEST MY 6]

What Motor is in your Bird??

 

[TurBo BiRd]

T T A

 

[RealFastV6]

I really doubt changing the cam and lifters would cause your car to disapear. I would suggest looking in the garage, possibly the driveway. If its still missing, call the police and report it stolen.

Hope this helps!

 

[RealFastV6]

Oh yeah, for real this time...

How did you set the valve lash? Stock Rockers? How did you determine the pushrod length? What cam did you install? Are you 100% positive you degreed it correctly?

 

[TurBo BiRd]

I didnt change the cam, Stock rockers torqued to 44 ft lbs (TTA spec)

 

[TurBo BiRd]

and i used the same length pushrods

 

[Lee Thompson]

miss

Sounds like you got a pushrod out of position--either not sitting on the lifter on in the rocker pocket. Dead miss?

 

[TurBo BiRd]

that's an idea
i like it

 

[TurBo BiRd]

I pulled my plugs and the passenger bank were wet w/ gas... Any suggestions? Im gonna run a spark test tomorrow.