You can type here any text you want

CHARGING CONCERN

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

dragway

Member
Joined
Nov 6, 2011
Messages
101
last few time driving car scanmaster shows voltage jumping between 12.7-13.2 or so with lights on at night with no lights on still only reads 13.3-13.5 seems low battery is brand new . what do they normally charge at ?
 
Does your alt/battery light come on with key in the "on" position, but not running.
 
The scanmaster reads what the ECM is getting, which is usually lower than the alternator output to the battery. Perfectly acceptable, you can verify with a voltmeter at the battery.
 
What you see on scanmaster is not battery/alternator voltage. It is ignition voltage.
 
I just wanted to make sure the fuel pump was getting enough voltage. Thanks
 
Back
Top