V6UnderPressure
The Artist FKA Scott4DMny
- Joined
- May 27, 2001
- Messages
- 2,912
Classic Fast Sequential ECU with low mile Wideband Oxygen sensor. Firmware was upgraded and ECU checked 12-7-07 by FAST. Hasn't been run since. You will need a harness to run this which you can get from caspers and I believe precision. C-Com software is available online. Asking 900 shipped.
RJC Black Anodized Aluminum Razor style pulleys. These pulleys were installed yet never run. You will get the Crank pulley, Water pump pulley, Alternator pulley, and Power steering pump pulley. These are 349 brand new without shipping. 300 shipped firm.
Brand new Champion AC delete bracket. Never installed. Includes all hardware. Also included is a brand new Gates belt. 200 shipped
Precision Front mount intercooler. Core and Hoses/hardware are brand new from precision. Pipes are used but in good shape. There is a hole for alky. The inlet pipe had nicks on the front part so I took some light sandpaper to smooth it out a bit. There is a very light ding on the bottom as well that is not noticeable. It also has a little polished section from when the hood pad rubbed against it. The smaller pipe seems to have had a dent but was pushed back out and I took a picture of that as well. That one is barely even noticable. Just want to show all possible flaws. Pipes would be perfect for polishing or powdercoating. Asking 775 shipped obo.
RJC Black Anodized Aluminum Razor style pulleys. These pulleys were installed yet never run. You will get the Crank pulley, Water pump pulley, Alternator pulley, and Power steering pump pulley. These are 349 brand new without shipping. 300 shipped firm.
Brand new Champion AC delete bracket. Never installed. Includes all hardware. Also included is a brand new Gates belt. 200 shipped
Precision Front mount intercooler. Core and Hoses/hardware are brand new from precision. Pipes are used but in good shape. There is a hole for alky. The inlet pipe had nicks on the front part so I took some light sandpaper to smooth it out a bit. There is a very light ding on the bottom as well that is not noticeable. It also has a little polished section from when the hood pad rubbed against it. The smaller pipe seems to have had a dent but was pushed back out and I took a picture of that as well. That one is barely even noticable. Just want to show all possible flaws. Pipes would be perfect for polishing or powdercoating. Asking 775 shipped obo.