What have you guys used to take the clear coat off of your GTA wheel?:confused:

I posted this in 2003:

I just sanded the clear from a set of GTA wheels I acquired. I used 180 grit paper to remove the clear. I then used a drill with a 3" stainless type polishing pad with fast cut rubbing compound. Came up great. Can finish by hand with metal polish.

Had some road rash on the end of the lip, here and there, I used 80 grit on a block to sand/polish off the bulk of the damage. Polished up fine.

These be them .......


  • Picture 222.jpg
    Picture 222.jpg
    66.6 KB · Views: 105