Coilover springs

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Mike E

Mr. Badwrench
Joined
Oct 9, 2006
Messages
1,476
I have 4 sets of coilover springs left over from my quest to find the right ones. All are QA1 2.5".

All are in pairs and will sell for $50 per set plus shipping

10"-350lb.
10"-400lb. SOLD
10"-125lb.
12"-125lb. SOLD
 
Last edited:
I have 4 sets of coilover springs left over from my quest to find the right ones. All are QA1 2.5".

All are in pairs and will sell for $50 per set plus shipping

10"-350lb.
10"-400lb.
10"-125lb.
12"-125lb.
On your quest, what did you end up with? :)
 
There is nothing in the car right now. I'm wanting to sell these and buy the next set from TRZ based on what they say about my corner weights. The 10"-400 front and 12"-125 rear is probably still right, but I have such a short shock in front I might need an 8" spring.
 
How did your car sit with the 10" 400 12" 125 springs in it? Do you have any fender measurements or pics? Might be interested in them. Thanks Joel.
 
Joel,

Here is the best picture I have. This is the 400's up front and 12"-125's in the rear. But, the fronts were at the lowest point of the adjustment and I have a 3" travel shock vs. the typical 4". I could have raised it up another 2" in the front, but I think an 8" spring might be better for my short shocks. The rears are also on adjustable mounts and they are about 1" up from the rearend housing.

John,

Let's see what Joel want's to do.

IMG_0266_zpsdfd0952e.jpg
 
Yeah mike , those look good to me. Ill take the 400# fronts and the 10" 125 rears. Pm me a total to 02061 thanks Joel
 
It gets low and digs all the way down. Mike do u have any stock location shocks like maybe a single adj for the rear. That sexy beast shure looks good!!

Sent from my ADR6410LVW using TurboBuick Mobile mobile app
 
Back
Top