Cold Air Induction Systems

[84GNTTYPE]

What are the different vendors out there that make cold air systems for the hotair cars?

Thanks!

 

[BlackBuick84]

here's one:
http://www.buickgn.com/hotairbigmouthkits.htm

 

[Buick From Hell]

For the hotair cars, there's Mark (above)...and there's home-made! Don't think anyone else offers one!

 

[turbojitsu85]

Kenne Bell makes one and so does Postons but Marks I think is the best one. I have Postons because I didn't know about Marks when I bought mine. There is a good article somewhere on gnttype.org if your going to make one.

I have had to do a little home modification to it so it would be up to my standards. I put a rubber seal like the one Mark uses in his setup so that there is no air getting in between the MAF and the canister that the K&N sits in. Postons did't provide anything like that so the filter was still sucking in alot of hot air. Then I relocated the air/fuel canister to were the old air box was and cut a whole were the air/fuel canister sat this made it so the tubing would be straight on from the scoop to the air filter canister instead of taking a bunch of turns and constricting.

If your going to buy one buy Marks It doesn't requier any relocating of any kind not to mention the K&N filter is outside of the engine compartment were it stays cold. I've been thing of doing something similar like his setup for awhile I just can't find the right equipment to make it look good.

 

[turbo6x2]

Mark's is a very easy application and sounds great once installed. I would recommend it.

 

[TR Custom Parts]

Thanks for recommending my kit guys! Please note that these are available in triple plated chrome OR lightweight aluminum.