Cometic HG part# please.

[SS_Sean]

Need the part number for Cometic Head gaskets for a stock 109/stock 8445 heads. Thanks.

 

[Major Nutz]

Need the part number for Cometic Head gaskets for a stock 109/stock 8445 heads. Thanks.

H1602051S

 

[BEATAV8]

Gasket Image

Ask for your preferred thickness.

 

[SS_Sean]

What would be preferred thickness? Like I said, I've got stock heads, mild port, with stock block, .030 over. TRW pistons, stock rods, stock crank. Unfortunately I had a boost spike at the race track the other night and I believe it took out both my 9441 Felpro's.

 

[BEATAV8]

What would be preferred thickness? Like I said, I've got stock heads, mild port, with stock block, .030 over. TRW pistons, stock rods, stock crank. Unfortunately I had a boost spike at the race track the other night and I believe it took out both my 9441 Felpro's.

I run .060" but my heads and my block have been decked. If you have stock deck height then use the standard .040"

Read up on some of the threads about sealing these gaskets. There are a few active ones going right now.

 

[TAPerf]

We stock these gaskets in different thickness and two bore sizes.

 

[SS_Sean]

I wouldn't buy from you if you were the ONLY one who sold them. :wink:

http://www.turbobuick.com/forums/feedback/229347-ta-performance-sucks.html