richardv6
Active Member
- Joined
- May 11, 2007
- Messages
- 283
i purchased a stage2 3.8 shortblock from freind and took apart for inspection and all looks perfect had local machine shop check over,did light hone on cylinders and has fresh bearings,motor contains a bms 3.590 stroke crank,6"carrillo rods and je pistons.motor is .020 over.double rollor chain,solid roller cam and lifters,cam is 232/232.new front cover set of push rods.and pump,all arp fasteners the block has had some a repair in its history,fixed crack between freeze plugs on pass side which was common .but was told it was heat treated and properly repaired.and motor has been ran many times afterwards.i decided to put a oncenter stage 2 motor in my car and dont need this laying around.these motors are rare and would make a perfect streetcar motor.i am wanting $5500 for all.i took pics of parts apart and now all is reassembled.lifters labled were they come out.








