Complete wiring harness ($150 OBO shipped): This has been hacked up in several places but not disastrously: The connectors that have been removed are for the A/C, Powermaster brakes, and charcoal canister. Those connectors are present, in good working order, and could be spliced back in if necessary. ECM connector has been spliced with a 5v lead and ground lead to give the proper connections to the MAP for logging boost accurately. High speed delay (over temp) relay disconnected and taped up. New TPS connector spliced in. Caspers 12v relocation extension leads added. The two tabs that fasten the driver's side bundle to the valve cover have been removed. Most of the original hardware will be included along with a TPS intermediate harness with 5v lead and ground for running a 5v sensor (i.e., MAP, fuel pressure transducer). SOLD
Dual fans harness ($50 shipped): Has the delay module wired in to prevent both relays from kicking on at the same time. SOLD
Stock injector wiring harness ($40 shipped)
Click on my username for PayPal info.
Dual fans harness ($50 shipped): Has the delay module wired in to prevent both relays from kicking on at the same time. SOLD
Stock injector wiring harness ($40 shipped)
Click on my username for PayPal info.
Last edited: