CPP Cam 221-221

[SNKSKNR]

This is a brand new cam,lifters,springs,locks,and retainers in the box still.The cams specs are 276 276 advertised duration and 221 221 at .050 497 497 lift with a 112 lobe seperation.It is a hydralic cam it is not a roller.I am asking $260.00 for the complete kit.With this cam my car dynoed 510 rwhp with 20 psi and steel heads.If you have any other questions Email me at FIGSX@aol.com

 

[SNKSKNR]

CAM

TTT

 

[hipsi2fly]

this is a excellent cam! ran a few of these in motors that made over 600hp

 

[SNKSKNR]

Cam

TTT

 

[SNKSKNR]

Cam

 

[SNKSKNR]

Make me an offer

 

[SNKSKNR]

Cam

New price $200.00

 

[ITSAV6]

idle

How is the idle on this cam? Who made it?

 

[SNKSKNR]

cam

This cam idles very smooth. Conleys performance is the grind of the cam.

 

[turbo2nr]

Is cam new? How did you get Dyno results with cam still in box?
I need a cam, good for strip/street? I have a loose non-lockup, and my car is always over 2400RPM, even crusing.

 

[SNKSKNR]

Cam

I have one in my car right now and I have this one brand new in the box on my shelf. I love this cam and it does work. The car that is in right now is a stock piston with ported steal champion heads 63 turbo and 55 lb injectors. The trans has a 3200 stall, with foot braking it on BFGs the 60 ft is 1.50s. Its not a huge cam that you lose your bottom end power.

 

[SNKSKNR]

Cam

Ttt

 

[BAGN]

this is a excellent cam! ran a few of these in motors that made over 600hp

Me too. This is the best Hydrolic Street/Strip cam on the market. Great for 12,11, & 10 sec street cars. At that price, Your giving it away. If I wasn't going Stage II/Stage II I'd probably buy it from you. Good luck with sale.

 

[fbodlovr]

Ok, If this will work in basically a stock motor 84gn, let me know. Right now the stall is stock, basically everything is. BUT, it isnt going to be for long. Will this thing be able to go in right now and still be drivable? If its street strip freindly, consider it sold for 200 shipped?! Let me know asap.

 

[SNKSKNR]

Cam

I woundn't recommend putting this cam in a stock 84 hot air car. You would need ported heads and a bigger turbo. The cam idles at 700 to 800 fine. Stick with your stock cam for a while.

 

[fbodlovr]

sounds good.

 

[turbo261977]

offer

150 shipped if so let me know thanks and sorry about the low offer but it is all i have at the moment thanks again

 

[SNKSKNR]

offer

Sorry $200.00 is what I need. The cam is $179.00 Lifters were $80.00 Springs locks and retainers were $200.00 I spent $460.00 plus shipping for this. I need half of that at least. Thanks for the offer.

 

[Razor]

If the lifters are GM, i'll take the setup from you.

Email me at

idoxlr8_70@yahoo.com

THX