details, details

[Chad Oliver]

I just started replacing alot of vacuum lines w/rubber lines identicle to what I pulled off 7/32. Anyone have opinions or comments? I guess it's the proper size cause it fits like a glove. Had a problem removing some of the old stuff is there any helpful tips to keep the hardlines, etc. from bending?

 

[TRiv]

Just one comment, there is a "tee" or "cross" vacuum fitting in between the turbo housing and wastegate, make sure you use the one that is there ,it should have on orifice inside , it regulates the wastgate, that is of course if you are replacing hoses in that area. There is some vacuum hose stuff in the sticky above," Basic hot air info".

 

[Turtle TR]

hah? there was restricter on the vacuum Y-Fitting? When I was changing out my vac lines, i noticed mines didnt.

 

[Lee Thompson]

hose

With an external gate you won/t be using the Y or the waste gate soleniod.

 

[Turtle TR]

Re: hose

Originally posted by Lee Thompson
With an external gate you won/t be using the Y or the waste gate soleniod.

Oh yeah!!! I forgot about the buggar!