Digital dash ????

[Black Car]

The reset/convert rod is loose on the dash. It doesn't seems to make connect very well. The dash was displaying US reading but I removed it to see if I could fix the rod. Couldn't figure a way, so I put it back in.
The problem is now it displays metric. I have tried pushing, pulling and twisting of the rod but no change, except for resetting the trip meter.
Any thoughts???

TIA

Gary

 

[Weazel]

Hey,

Mine typically reads metric after I bring it out in the spring. I figured out that you have to turn the rod to the right and hold it there for a few seconds. If yours isn't making the connection, this may not work, but that's how I fixed mine. It takes a little longer than you'd think, but after a few seconds it should click back to good old AMERICAN units

 

[BLACK6PACK]

I have to push mine in and turn it to the right. Mines kinda loose too.

 

[36IndexGN]

you may need to move to Canada But Seriosly, I have the dash but never had that problem, what I wanna do is convert mine to finally read over 85 MPH.

 

[Black Car]

Originally posted by 36IndexGN
you may need to move to Canada But Seriosly, I have the dash but never had that problem, what I wanna do is convert mine to finally read over 85 MPH.

You will need to contact Casper to get it modified to read over 85.

Gary