Dual Fan Options

[MikeL.]

I've been looking up various dual fan threads and noticed that the Intrepid fans/dual fans (sold by various vendors on the board) are starting to seize and or motors need to be replaced.

Having recently moved to a V2, I'm wondering what other dual fans you guys running and are you using the Caspers or RaceTronix fused relays to power them?

I realize the 99 dollar fans are cheap, but I'm looking for other alternatives and am willing to pay the difference now, rather than later when they crap out. Curious to what's out there.

 

[87GN_70GS]

Derale has some TRUE 4000 cfm dual fans:

http://www.derale.com/catalog.pdf

HTH

 

[jsta6]

Derale has some TRUE 4000 cfm dual fans:

http://www.derale.com/catalog.pdf

HTH

wow, 16927 looks to be perfect...

 

[MikeL.]

Thanks for the link. did you end up using the capsers PnP harness?

 

[TurboDave]

wow, 16927 looks to be perfect...

I doubt it will, it's over 4" thick. Front mount tubes will certainly interfere.

 

[jsta6]

I doubt it will, it's over 4" thick. Front mount tubes will certainly interfere.

? catalog says 3.19" thick?

May be a typo?

I do see in the catalog that the 16934 has a flat shroud and that 16927 has a box shroud???

 

[silentbutdeadly]

i have the duel fans from gbodyparts with buick adapter and a front mount also with no clearance issues and no overheating problems either...happy so far.

 

[TurboDave]

i have the duel fans from gbodyparts with buick adapter and a front mount also with no clearance issues and no overheating problems either...happy so far.

I stand corrected. :redface:
But still too thick IMHO

 

[87GN_70GS]

RE: thickness

Keep in mind that a dual fan will be thickest at the motors, which will be off-center from from the pump pulley, IC etc.

 

[TurboDave]

Off center from the pump pulley, yes. Dead center on the front mount pipe from the turbo down under the core support.