dual nozzle install

[PaCemkr86]

is it ok to stagger the nozzles or is there a reason why most people put them facing each other???

 

[Razor]

Doesnt make a difference. Its like asking a drunk if he prefers a clean glass

 

[PaCemkr86]

thanks for the quick reply ... i wasnt sure..

 

[Razor]

No probs.. anything else.. hollar

 

[PaCemkr86]

ok i found this pic... is this still ok?

 

[Razor]

Nope, bottom nozzle places it under the height of the liquid.. can you say SIPHONING :redface:

9 and 3 o'clock. 6 iches from TB.

 

[pacecarta]

i staggered mine slightly , i went with center of the up pipe (9:00 and 3:00) due to the higher than normal uppipe location from the MPE 70mm plenum, otherwise i like 10 oclock on the stock setup
would have moved them a little further back but I had the hose clamp connector to deal with from previously having the maf there .

 

[Razor]

 

[Razor]

Hth

 

[PaCemkr86]

thanks for the heads up Julio

 

[PsYcHo GN]

No probs.. anything else.. hollar

How long should a typical installation take? How difficult is it to dial-in? Do you need to take it to a dyno tuner to dial-in?

 

[Razor]

How long should a typical installation take? How difficult is it to dial-in? Do you need to take it to a dyno tuner to dial-in?

Tuning takes some a lifetime Cuase we're always making changes.

I think your question is off topic for this thread. To install a couple nozzles.. an hour?? To install a kit.. ~3-4 hours for some. 16 hours for others. I can do an install in 2-3 hours typically. Some cars can be a bear.. like rotten hoses, oil in throttle body, oil in IC, etc..

Tuning an alky kit in.. totally different subject.. you have a lot of reading to do.

Start here
http://www.turbobuick.com/forums/alcohol-nitrous-propane-tech/147348-tuning-alkycontrol-kit.html

 

[PsYcHo GN]

Do you know of anybody in Southern California who carries your kits and does the installation as well?

 

[Razor]

Sod at Hye-Tech has done the sale/install. La Puente CA 626-855-1154

 

[myfast70]

Hth

That's a clean looking setup!