DW fuel pump to & Racetronix Fuel sender

[87WE4BOOSTED]

This is an FYI....

If you use this combination check the contiuity of the wires that go to the pump from from the fuel hanger... Mine was crossed and had to trouble shoot the issue for a week... Now i hope i didn't toast the bearings...

Posted from the TurboBuick.Com mobile app

 

[forcefed3.8's]

I had the same issue. The wiring in the hanger is backwards. It isn't because the DW pump is backwards from a Walbro. All Racetronix hangers need to be checked.

 

[ghost rider]

Hey you guys wouldn't have the diagram of the wiring units I might need it later if I decide to go that route if my walbro dp ever goes out. thanks

Posted from the TurboBuick.Com mobile app

 

[forcefed3.8's]

Just look at the fuel pump, it is marked +,-, and the racetronix harness has the red going to the -, and the black going to the +. If it works with a walbro, it will work with a DW pump.

 

[ghost rider]

Thanks

Posted from the TurboBuick.Com mobile app

 

[Wahoo]

I had the same issue. The wiring in the hanger is backwards. It isn't because the DW pump is backwards from a Walbro. All Racetronix hangers need to be checked.

So its a manufacturing mistake?

 

[Racetronix]

So its a manufacturing mistake?

No, the in-tank harnesses are wired for Walbro GSS294M pumps which is the standard 255LPH we supply. We put a sticker on the top of the hanger boxes noting that the polarity needs to be checked.

 

[87WE4BOOSTED]

Must have missed that sticker...Still all good though..

Posted from the TurboBuick.Com mobile app